SuperKVM Wiki
Official SuperKVM wiki: USB KVM / IP KVM hardware docs, clients, guides, CH9329 open protocol, and secondary-development references.
USB LOOP KVM USB LOOP KVM is a USB KVM based on MS2131. Compared to MS2109, it supports USB3.0, loop out, and higher resolution. It allows us to capture video while also normally looping out a video of original resolution for external display. In scenarios where on site display monitoring is needed, you need to choose the LOOP version and connect the loop out interface to the display. Appearance Interface 1. Keyboard and Mouse Output: Connect to the USB port of the target computer 2. HDMI Input: Connect to the HDMI output port of the target computer, this port is usually originally connected to a monitor 3. USB Disk: Insert an SD card, the hardware converts it into a USB drive, you can switch the direction through the client control button, default connection is to Target 4. HDMI Loop out: Mirror output of the HDMI input video, can be connected to an external display 5. HOST USB Control Port: Connect to your laptop, you can display video and control mouse and keyboard through the client. USB KVM version is USB2.0. USB LOOP KVM version is USB3.0, so the LOOP version must be configured with a blue interface USB data cable . Compared to USB KVM, USB LOOP KVM from an appearance perspective only has one more LOOP output, and all other software features are exactly the same, so please continue to refer to USB KVM for other steps.
Canonical: https://wiki.superkvm.com/en-US/guide/usb-loop · Marketing: https://www.superkvm.com · GitHub: https://github.com/superkvm