SuperKVM Wiki
Official SuperKVM wiki: USB KVM / IP KVM hardware docs, clients, guides, CH9329 open protocol, and secondary-development references.
USB Pro KVM USB Pro KVM is a USB KVM based on MS2131s, with the same appearance as USB LOOP. Video capability parameters have been improved: Maximum input support: 4096×2160@60Hz (YUV420) 4096×2160@30Hz (YUV444). USB UVC output maximum support: 3840×2160@30Hz (YUV420) 4096×2160@60Hz (MJPEG) Appearance Interface 1. Keyboard and Mouse Output: Connect to the USB port of the target computer 2. HDMI Input: Connect to the HDMI output port of the target computer, this port is usually originally connected to a monitor 3. USB Disk: Insert an SD card, the hardware converts it into a USB drive, you can switch the direction through the client control button, default connection is to Target 4. HDMI Loop out: Mirror output of the HDMI input video, can be connected to an external display 5. HOST USB Control Port: Connect to your laptop, you can display video and control mouse and keyboard through the client. USB KVM version is USB2.0. USB LOOP KVM version is USB3.0, so the LOOP version must be configured with a blue interface USB data cable . All other software features are exactly the same, so please continue to refer to USB KVM for other steps.
Canonical: https://wiki.superkvm.com/en-US/guide/usb-pro · Marketing: https://www.superkvm.com · GitHub: https://github.com/superkvm